The CD40106 is a super handy IC with six Schmitt Trigger inverter/NOT gates. It contains 6 individual gates that can be used to create oscillators for blinking LEDs, creating sound, and much more.
A Schmitt trigger input means that the threshold voltage for going from a HIGH to a LOW input is different from the threshold for going from LOW to HIGH.
Pin Overview
| Pin Name | Pin # | Type | Description |
|---|---|---|---|
| VDD | 14 | Power | Supply Voltage (+3 to +15V) |
| GND | 7 | Power | Ground (0V) |
| A, B, C, D, E, F | 1, 3, 5, 9, 11, 13 | Input | Inputs to the inverters/NOT gates |
| A, B, C, D, E, F | 2, 4, 6, 8, 10, 12 | Output | Outputs from the inverters/NOT gates |
What is a Schmitt Trigger Inverter?
An inverter, or a NOT gate, is a standard logic gate that inverts whatever is on the input. A 0 (LOW) becomes a 1 (HIGH), and a 1 (HIGH) becomes a 0 (LOW).
The special thing about a Schmitt trigger inverter is that the threshold voltage for going from a HIGH to a LOW input is different from the threshold for going from LOW to HIGH. This makes it really easy to design oscillators by just adding a resistor and a capacitor to the gate.
How to Use the CD40106 in a Circuit?
To use the CD40106 in a circuit, you need a power supply voltage of 3 to 15V (some versions support up to 20V, so check the datasheet of your version). Connect the power supply to the VDD and GND pins of the chip.
You can now use any of the six inverters in the chip.
CD40106 Example Circuit – Blinking an LED
In the following circuit example, you’ll build an oscillator that blinks an LED at a rate of about 1 time per second.
To build this circuit, you’ll need the following components:
Build Something Useful This Evening
This gadget lets you use any IR remote-control to control your lamp, garden lights, heater oven, garage door, or anything else.
- 9V Battery
- Schmitt Trigger Inverter (CD40106)
- Capacitor of 100 µF (C1)
- 2 x Resistor of 10 kΩ (R1 and R2)
- An LED
Click here to learn more about how this blinking LED circuit works and how to build it.
Alternatives and Equivalents for CD40106
The 40106 IC is always identified by a prefix and/or a suffix, such as CD40106BE, NTE40106, HEF40106, TC40106BP, MC140106, or HCF40106. This tells you the manufacturer of the chip. Each manufacturer might have slightly different current and voltage ratings, but the functionality and the pins remain the same.
If you can’t find any of these chips in your local electronics store, check out my list of online stores where you can find components and tools for all your electronics projects.
Can’t find the 40106 anywhere? Then try one of the following IC alternatives:
- 74C14: Pin compatible and supports higher output currents
- 74xx14: 74HC14, 74LS14, and other chips have the same functionality but lower voltage ratings
40106 Datasheet
Download the PDF datasheet for the IC 40106 here:
- CD40106B (Texas Instruments)
- HEF40106B (Nexperia)
- MC14106B (On Semiconductor)
- HCF40106 (STMicroelectronics)
Go back to the full overview of the 4000-series integrated circuits
10 Simple Steps to Learn Electronics
Electronics is easy when you know what to focus on and what to ignore. Learn what "the basics" really is and how to learn it fast.
