Have you ever considered bringing your soldering iron on vacation?
I am in Mexico at the moment and of course I have my soldering iron in my suitcase. But here the other day I got myself a surprise that I never considered could be a problem.
I have an old ERSA-30 soldering iron that I inherited from my dad. It’s designed for the European 220V wall plug. Therefore I used an adapter to make it fit the Mexican wall plug. It’s not a converter, just a simple mechanical adapter that lets me plug my European plugs into the Mexican plugs.
I wanted to solder some stuff, so I plugged it in and waited…
After a few minutes I took out some solder and put it against the tip. But it didn’t melt, so I put it down to wait some more. It’s an old soldering iron, so I guessed it just wasn’t as efficient as newer ones.
Oyvind's Circuit Tips
Get my tips for learning electronics, curious circuits, useful tutorials, hints for choosing components and much more via email.
Then after another 5 minutes I tried again. Still, the solder didn’t melt. WTF??
I waited another 5 minutes….
Until I realized – “It’s only 110V here in Mexico!!!”
Since my soldering iron is designed for 220V it did not get enough power from the 110V plug to heat up sufficiently.
So lesson learned – when in Mexico, do as the Mexicans do – use a soldering iron for 110V ;)
More Soldering Tutorials
Free Course: Blinking a Light
Join my free email course on how to build a circuit that blinks a light. Enter your details below and you'll receive the first lesson right away:
